Axis 5470e User Manual page 48

48
Section 4: Setting Up - AS/400
Creating a Printer
Device Description
Create a printer device description by following the instructions
below:
1. Issue the command CRTDEVPRT and press Enter.
2. Press F11 to display keywords.
3. Select a name for the printer device and enter it at the
Description (DEVD)
A-Z and the numerals 0-9, but must begin with a letter. A
maximum of 10 characters are allowed. In the following
instructions the printer device name will be referred to as
AXISPR1.
4. Enter at the
*LAN
5. Enter at the
*IPDS
6. Enter at the
0 Device model (MODEL)
7. Enter at the
*IP
8. Enter a port number at the
print server is pre-configured with the port numbers 5001, 5002
and 5003 for IPDS printing.
9. Enter a FGID number at the
11 (Courier).
10. Define the
Remote location (RMTLOCNAME)
of the AXIS 5470e.
11. (Optional) Enter the name of the previously created PSF
configuration at the
line.
Object
12. (Optional) Enter the library of the previously created PSF
configuration at the
line.
Library
13. (Optional) Enter
*PSFCFG
(USRDFNOBJ): Object type
14. Press the Enter key on your keyboard to create the printer device
description.
AXIS 5470e User's Manual
line. The name may comprise the letters
Device class (DEVCLS)
Device type (TYPE)
LAN attachment (LANATTACH)
Port number (PORT)
Font Identifier (FONT)
User-defined object (USRDFNOBJ):
User-defined object (USRDFNOBJ):
at the
User-defined object
line.
Device
line.
line.
line.
line.
line. The Axis
line, e.g.
. Use the IP address