Setting Up - Windows; Section 7 Setting Up - Windows - Axis 5470e User Manual

104
Section 7: Setting Up - Windows
Section 7
Windows
Platform
Windows
2000, XP
Windows
95/98
NT 4/2000
Windows
NT 3.5x
Windows
2000/XP
95/98
NT 3.5x/4.0

Setting Up - Windows

Having connected the AXIS 5470e to your network, as described in
Connecting a printer to the Ethernet Network, on page 16, this section
describes how to install the AXIS 5470e in the Windows environment.
Identify your Windows platform and follow the installing instructions
from the list below.Overview of installation methods
Refer to the table below to determine the most appropriate
installation method according to your computer environment:
Printing
Method:
Protocol
Standard Windows
TCP/IP
'Add Printer Wizard'
TCP/IP
AXIS Print Monitor
NetBIOS/NetBEUI
Microsoft LPD
TCP/IP
Monitor
If you intend to use the AXIS 5470e in a multiprotocol environment,
you should also refer to the following sections:
Section 6 Setting Up - NetWare, on page 96
Section 8 Setting Up - OS/2, on page 117
Section 9 Setting Up - Macintosh, on page 122
Section 10 Setting Up - UNIX, on page 128
Section 12 IPP (Internet Printing Protocol), on page 158
If you want to change the default name or the password of the AXIS
5470e, use the Configuration Wizard that is available from the User
mode of the Web interface. Refer to Using a Web browser, on page
135.
AXIS 5470e User's Manual
See ...
TCP/IP printing in Windows 2000 and Windows XP, on page 105
AXIS Print Monitor Overview, on page 106
Using the Microsoft LPD monitor, on page 110