TP-Link TL-WA730RE User Manual page 29

Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen as Figure
4-5.
You will see the following screen when the new device has successfully connected to the network.
Note:
1. The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2. The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.
TL-WA730RE 150Mbps Wireless N Range Extender User Guide
The WPS Configuration Screen of Wireless Adapter
Figure 4-8
21