TP-Link TL-WA730RE User Manual page 13

RESET: The Reset button is used to restore the AP's factory default settings. There are two ways
to reset the Access Point's factory defaults:
Method one: With the AP powered on, use a pin to press and hold the Reset button (about 5
seconds) until the System LED becomes quick-flash from slow-flash. And then release the
button and wait the AP to reboot to its factory default settings.
Method two: Restore the default settings from "System Tools > Factory Defaults" of the
AP's Web-based management page.
Wireless antenna: The external antenna is used to transmit and receive wireless data.
Note:
Ensure the Range Extender is powered on before it restarts completely.
TL-WA730RE 150Mbps Wireless N Range Extender User Guide
5