Download Print this page

Kidde I5000 Specifications

120v ac wire-in smoke alarm

Advertisement

Quick Links

120V AC Wire-In Smoke Alarm
Slide Load Front Battery Door, Alkaline Battery, 10 Yr Warranty
Model i5000
– Ionization Sensing Technology
– Battery Backup (batteries included)
– Hush
®
Button
– Alarm Memory Indicator
– New 360˚ Mounting Plate
with Tamper Resistance
– Front Load Battery Door
Description
The Kidde i5000 is an AC/DC powered, ionization smoke
alarm that operates on a 120V power source with 9V
alkaline battery backup.
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to help
insure maximum detection of the various types of
fire that can occur within the home.
The front-loading battery door allows user to change the
battery without removing the alarm from the mounting
bracket making battery replacement easy and convenient.
This smoke alarm is available in a 6-piece cut case with
tray for easy display as well as a 6-piece bulk pack for
contractors and property owners. This unit is a UL Listed
product with a 10-year limited warranty.
Install Confidence:
Easy Installation
• Front battery pull tab allows battery activation
without removing alarm from mounting bracket.
• Large mounting base makes mounting easier, protects
surface paint from dirt and covers imperfections.
• Pre-stripped wiring harness with easy off cap does
not require stripper tool. Tinned strands increase
conductivity and wire nut grip.
Fewer Callbacks
• Large centrally located Test/Hush
• Dust cover protects sensor from contaminates during
construction reducing nuisance alarms.
User-Friendly Features
• Easy access front loading battery door.
• Battery backup provides protection in case of power failure.
• Interconnectable with up to 24 devices (of which 18
can be initiating) including smoke, CO and heat alarms.
See user's guide for complete instructions.
®
alarm control button.

Advertisement

loading

Summary of Contents for Kidde I5000

  • Page 1 Tamper Resistance – Front Load Battery Door Description Install Confidence: The Kidde i5000 is an AC/DC powered, ionization smoke Easy Installation alarm that operates on a 120V power source with 9V • Front battery pull tab allows battery activation alkaline battery backup.
  • Page 2: Specifications

    Article 760 of the National Electric Code, and NFPA 72. Make certain all alarms are wired to a single, The smoke alarm shall be Kidde Model i5000 or approved equal. It continuous (non-switched) power line, which is not protected by a ground fault interrupter. A maxi- shall be powered by a 120VAC, 60Hz source along with a 9V alkaline mum of 1000 ft.