To Replace The Battery - HP 900 Reference Manual
Hewlett-packard omnibook reference guide
Hide thumbs
Also See for 900:
- Quick setup sheet (1 page) ,
- Service information manual (198 pages) ,
- User manual (76 pages)
Table of Contents
Advertisement
CAUTION
To replace the battery
If you have any unsaved data, it (and your current work session) will be lost when
you remove the battery unless the computer is connected to ac power. Also, you
should wait at least 3 seconds after inserting the battery before you unplug the ac
adapter.
1. Important. Save your work.
2. Plug in the ac adapter.
–or–
From the Start menu, shut down the OmniBook.
3. Slide the battery's front panel to the right, as shown.
4. Pull the battery out of the bay.
5. With the front panel in the open position, slide the charged battery into the OmniBook
until it is flush with the unit.
Managing Battery Power
Monitoring Battery Power
Reference Guide
55
Advertisement
Table of Contents
