Apm Configuration - Asus SABERTOOTH Z97 MARK 1 Manual

The following item appears only when you set the Realtek
Realtek PXE Option ROM [Disabled]
This item allows you to enable or disable the Realtek
Environment) option ROM.
Configuration options: [Disabled] [Enabled]
Intel LAN Controller [Enabled]
This item allows you to enable or disable the Intel
Configuration options: [Disabled] [Enabled]
The following item appears only when you set the Intel LAN Controller to [Enabled].
Intel PXE OPROM [Disabled]
This item allows you to enable or disable the Intel
Environment) option ROM.
Configuration options: [Enabled] [Disabled]
3.6.8

APM Configuration

ErP Ready [Disabled]
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)]
Restore AC Power Loss [Power Off]
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State], it goes to the previous state before the AC
power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCI-E [Disabled]
This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
ASUS SABERTOOTH Z97 MARK 1
LAN Controller to [Enabled].
®
LAN PXE (Preboot Execution
®
LAN controller.
®
LAN PXE (Preboot Execution
®
3-43