Helpful Hints And Tips - Zanussi ZWD 14791 W User Manual

Washer-dryer
Hide thumbs Also See for ZWD 14791 W:
Table of Contents

Advertisement

If you wish to open the door before or during the
anti-crease phase or to interrupt it, press any button
or turn the programme selector dial to any programme
position (except O ).
8. Turn the selector dial to the O position to switch the
machine off.
9. Remove the laundry.
Automatic washing and drying (NON-STOP
programme)
For NON-STOP programmes, the recommended load size
is 4 kg for cotton and 3 kg for synthetic.
It is possible to dry up to 6 kg of cotton items by
pressing Drying Time button only (see the «Drying
Programme » table).
Caution! Do not use a dosing device/ball when
carrying out a washing and drying programme.
1. Load the laundry.
2. Add detergent and fabric softener.
3. Switch the machine on by turning the selector dial to
the selected washing programme/fabric.

Helpful hints and tips

Sorting out the laundry
Follow the wash code symbols on each garment label and
the manufacturer's washing instructions. Sort the laundry
as follows: whites, coloureds, synthetics, delicates, wool-
lens.
Before loading the laundry
Never wash whites and coloureds together. Whites may
lose their «whiteness» in the wash.
New coloured items may run in the first wash; they should
therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and
poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie them
up in a bag or net.
Removing stains
Stubborn stains may not be removed by just water and
detergent. It is therefore advisable to treat them prior to
washing.
1) do not use acetone on artificial silk
4. Select the required options by pressing the relevant
buttons.
If possible, do not select a spin speed lower than that
proposed by the appliance to avoid too long a drying time
therefore saving energy.
In any case the reduction of the spin speed is only
possible after selecting drying.
The lowest values you can select are the following:
– 900 r.p.m. for cottons and synthetic with electronic
drying;
– 900 r.p.m. for cottons and 700 r.p.m. for fabrics
with timed drying.
5. Select the drying time by pressing button 5 or dryness
degree by pressing button 4 . The display shows the
entire duration of the washing and the selected drying
cycle.
6. Start the programme by pressing button 8 . After the
programme has started, the time remaining is upda-
ted every minute.
7. At the end of the programme turn the selector dial to
the O position to switch the machine off.
8. Remove the laundry.
Blood: treat fresh stains with cold water. For dried stains,
soak overnight in water with a special detergent then rub
in the soap and water.
Oil based paint: moisten with benzine stain remover, lay
the garment on a soft cloth and dab the stain; treat several
times.
Dried grease stains: moisten with turpentine, lay the gar-
ment on a soft surface and dab the stain with the fingertips
and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing
product used cold. Be careful with rust stains which are
not recent since the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and fast
coloureds only).
Grass: soap lightly and treat with bleach (whites and fast
coloureds only).
Ball point pen and glue: moisten with acetone
garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains
with methylated spirits. Treat any residual marks with
bleach.
1)
, lay the
11

Advertisement

Table of Contents
loading

Table of Contents