Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document.
Safety information In the interest of your safety and to ensure Always unplug the appliance and turn off the the correct use, before installing and first water supply after use, cleaning and using the appliance, read this user manual maintenance. carefully, including its hints and warnings.
Never pull the power supply cable to remove the plug from the socket; always take hold of This appliance is designed for domestic use. the plug itself. It must not be used for purposes other than Never use the washer-dryer if the power those for which it was designed.
Control panel and functions Control Panel key symbols: = «No spin» option, = «Rinse Hold» option, = Child safety lock Information The control panel is illustrated above. It shows the programme selector dial as well as the different buttons, the pilot lights and the display. These are represented by relevant numbers which are explained in the table below.
Page 7
By pressing this button, the machine performs some Extra Rinse button additional rinses. The display shows the following information: duration of the selected programme, selected drying time, incorrect Display option selection, alarm codes, heating phase, child safety lock and end of programme. This button allows you to start the selected programme;...
Page 8
Display /Alarm codes The display ( ) shows the following In the event of operating problems, some information: alarm codes can be displayed, (see paragraph Duration of the selected programme/ «What to do if...»). After selecting a programme the duration of the selected programme appears on the dis- /End of programme 2.05...
Page 9
Functions Extra Rinse option (button This option is recommended for people who No spin (button are allergic to detergents, and in areas where By selecting this option all the spinning phases the water is very soft. The machine performs are suppressed to prevent the fabrics from some additional rinses.
Programme table Programme/ Description of Type of laundry Options Temperature programme Main wash, rinses Spin red. White cotton Long spin at max speed Cottons Prewash, Intensive, (normally soiled cotton Max Load: 6 Kg 90° Super Quick items Reduced Load: 3 Kg Extra rinse White and fast Main wash, rinses...
Page 11
Programme table Programme/ Description of Type of laundry Options Temperature programme Programme for wool Main wash, rinses Wool «Pure new wool, non- Short spin at 900 rpm Spin red., shrink, machine 40° Max Load: 2 Kg washable» label. Main wash, rinses Handwash Special programme for Short spin at 900 rpm...
Programme information This programme can be selected for slightly or normally soiled cotton items. The temperature will decrease and the washing time Eco programmes will be extended. This allows you to obtain a good washing efficiency whilst saving energy. Washing programme for machine washable wool as well as for hand Wool and washable woollens and delicate fabrics with the «hand washing»...
Washing and drying hints Sorting the laundry Avoid drying dark clothes with light coloured fluffy items such as towels as these can attract Follow the wash code symbols on each the fluff. garment label and the manufacturer’s washing Remove the laundry when the appliance has instructions.
Maximum loads Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and Recommended loads are indicated in the dab the stain; treat several times. programme charts. Dried grease stains: moisten with turpentine, General rules: lay the garment on a soft surface and dab the Cotton, linen: drum full but not too tightly stain with the fingertips and a cotton cloth.
The choice of detergent will depend on the Follow the product manufacturers’ instructions type of fabric (delicates, woollens, cottons, on quantities to use. etc.), the colour, washing temperature and Degrees of water hardness degree of soiling. All commonly available washer-dryer Follow the product manufacturers’...
Before the first use Acoustic signals WARNING! The machine is supplied with an acoustic Ensure that the electrical and water device, which sounds in the following cases: connections comply with the installation at the end of the cycle instructions. in the event of operating problems IMPORTANT! By pressing the buttons Remove the polystyrene block and any...
Operating sequence - Washing only Washing At the end of the programme the selector dial must be turned to position «Off», to switch the machine off. 1. Load the laundry Open the door by IMPORTANT! carefully pulling the If you turn the programme selector dial to door handle outwards.
Page 19
Opening the door after the programme has Start the programme by pressing button started To start the selected programme, press this First set the machine to pause by pressing the button; the corresponding green pilot light button . The door can be opened stops flashing.
Turn the programme selector dial to «Off» to Stand by: once the programme has finished switch the machine off. after a few minutes the energy saving system will be enabled. The brightness of the display Remove the laundry from the drum and is reduced.
NON-STOP programme (Washing and Timed Drying) The recommended load to wash and dry in 6. Start the programme by pressing the button your washer-dryer is 3 kg for cotton and 2 kg . After the programme has started, the for synthetics. time remaining on the display is updated every minute.
Care and cleaning IMPORTANT! To aid cleaning, the top part of the additive compartment should be removed. You must DISCONNECT the appliance from Remove the drawer by pressing the catch the electricity supply, before you can carry out downwards and by pulling it out. Flush it out any cleaning or maintenance work.
Page 23
Care and cleaning • Replace the emergency emptying cap into the filter cover and fix it firmly. • pull out the emergency emptying cap from the filter cover, using a pliers. • When no more water comes out,unscrew the • Close the pump door. pump cover by turning it anti-clockwise, using pliers, and remove the filter.
Page 24
Care and cleaning Turn off the water tap. Emergency emptying out Unscrew the water If the water is not discharged, proceed as inlet hose. Clean the follows to empty out the machine: filter using a hard • pull out the plug from the power socket; bristle brush.
What to do if... IMPORTANT! Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. During machine operation it is possible that the red pilot light of the button flashes, the buzzer sounds and one of the following alarm codes appears on the display to indicate that the machine is not working.
Page 26
Malfunction Possible Cause / Solution The end of the drain hose is too low. The machine fills then empties • Refer to relevant paragraph in «water drainage» immediately: section. The drain hose is squashed or kinked. • Check the drain hose connection. The drain pump is clogged.
Page 27
Malfunction Possible Cause / Solution The programme is still running. • Wait until the end of washing cycle. The door lock has not been released. The door will not open: • Wait a few minutes. There is water in the drum. •...
Page 28
Malfunction Possible Cause / Solution The machine does not dry or does not The drying time has not been selected. dry properly • Select the drying time. The water tap is not turned on (E10) • Open the water tap. The drain filter is clogged (E20) •...
Technical data Dimensions Width 60 cm Height 85 cm Depth (including the porthole) 63 cm Electrical connection Voltage - Information on the electrical connection is given on the rating Overall power - Fuse plate on the inner edge of the appliance door Water supply pressure Minimum 0,05 MPa...
Installation instruction Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 5. Open the porthole and remove the polystyrene block fitted on the door seal.
Page 32
Special conditions NOTE If the floor is carpeted or covered with crumbly Installation should or soft material, insert a rigid support base comply with local under the feet to prevent noise, vibration or water authority and displacement. The base should protrude a few building centimetres beyond the edges of the machine.
Page 33
When discharging into a standpipe ensure that Important! the top of the standpipe is no more than 90 cm Before connecting the machine to new (35.4'') and no less than 60 cm (23.6'') above pipework or to pipework that has not been floor level.
Electrical connection Upon completion there must be no cut, or stray strands of wire present and the cord clamp Any electrical work required to install this must be secure over the outer sheath. appliance should be carried out by a qualified electrician or competent person.
The top must be fixed to the cabinet as follows: Unscrew the screws from the back panel of the appliance. Push the worktop to the back and raise it to remove (see the picture above). Environmental concerns Packaging materials Ecological hints The materials marked with the symbol To save water, energy and to help protect the recyclable.
Page 36
132963663 - 00 - 122010 Subject to change without notice...