Advertisement
Display
Residual heat indicator
Warning!
The risk of burns from residual heat!
Operating instructions
Activation and deactivation
Touch
for 1 second to activate or deactivate the appli-
ance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
Automatic Switch Off times
Heat setting
Stops after
The cooking zone selection
To set the cooking zone touch the sensor field
with the cooking zone. The display shows the selection by
the dot adjacent to the heat setting indication (
Helpful hints and tips
Cookware
• The bottom of the cookware must be as thick and
flat as possible.
• Cookware made of enamelled steel and with alu-
minium or copper bottoms can cause the color
change on the glass-ceramic surface.
Energy saving
• If it is possible, always put the lids on the cook-
ware.
The Automatic Switch Off operates.
.
-
6 hours
related
).
Description
The induction cooking zones make the heat necessary for
cooking directly in the bottom of the cookware. The glass
ceramic is hot from the heat of the cookware.
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth,
etc.) for longer than 10 seconds. Remove the object or
clean the control panel.
• you do not stop a cooking zone or change the heat set-
ting after some time. See the table.
-
5 hours
4 hours
The heat setting
Set the cooking zone. Touch
ting. Touch
to decrease the heat setting. The display
shows the heat setting. Touch
time to deactivate the cooking zone.
• Put cookware on a cooking zone before you start
it.
• Stop the cooking zones before the end of the
cooking time to use residual heat.
• The bottom of pans and cooking zones must
have the same dimension.
The Examples of cooking applications
The data in the table is for guidance only.
comes on.
-
1.5 hours
to increase the heat set-
and
at the same
7
Hide quick links:
Advertisement
