Shutdown - HP 355385-001 Software Manual

Ä
CAUTION: To prevent loss of data during a low-battery condition,
do not disable Hibernation when the battery pack is in a low-battery
condition.
Ä
CAUTION: If Hibernation is disabled, the system does not
automatically save your system memory when the notebook reaches
a critical low-battery condition.
When possible, save your work before initiating Hibernation so
that no data is lost. Do not change the notebook configuration
during Hibernation.
If a power-on password has been set, the password must be
entered to resume from Hibernation. If you cannot resume from
Hibernation when power is restored to the system, you will be
prompted to delete the restoration data and proceed with system
boot. Unsaved data will be lost.
Hibernation is enabled by default, but can be disabled. To verify
that Hibernation is enabled, select Start > Control Panel >
Performance and Maintenance > Power Options. Then select the
Hibernate tab. Make sure that the Enable Hibernation check box
is selected.

Shutdown

Shutdown turns off the notebook. Whether to leave a battery pack
in the notebook or in storage depends on how you work.
Leaving the battery pack in the notebook enables the battery
pack to charge whenever the notebook is connected to
external power and also protects your work during a power
outage.
A battery pack in the notebook discharges more quickly, even
when the notebook is turned off, than a battery pack that has
been removed from the notebook and is stored in a cool, dry
location.
Software Guide
Power
1–3