HP 600 User Manual page 66

LCD error messages
Display
No Dial Number
Not available while
reprinting fax
Not Found
Number already
registered
Number Not Assigned There is no number assigned to this One-Touch or two-digit
Poll Code Error
Poll job exists
already
Polling Error
Check remote site
Receiving Error.
Ask sender to
try again.
Remove jammed
document
Remove jammed paper
and press Cancel
Send Error.
Try again.
System Busy
Try again later
To redial now,
press Start
Processing Job
58 Care and maintenance
Status/Solution
There is no number in the redial memory.
The machine could not receive a new fax while printing the
stored faxes.
The number you are searching for does not exist in memory.
The number you are trying to enter already exists in the
phone book or junk fax list.
Speed number.
The remote user entered the wrong poll code.
You have already programmed a polling send. Cancel
scheduled job and try again.
The machine you want to poll is not ready to answer your
poll. Check with the other person.
There is an error while receiving a fax.
The document you are sending has jammed in the document
feeder. To clear the document jam, see Document jams
during transmission on page 50.
You tried to copy or fax a document which is longer than
390 mm (15.4 in.).
The paper has jammed during printing. To clear the paper
jam, see Paper jams during printing on page 51.
There is an error while sending a fax.
The fax machine is busy doing something else.
The machine is waiting (three minutes) to automatically
redial the fax number that was busy or did not answer.
You have the option to manually redial by pressing Start.
You attempted to enter Favorites while sending or printing
Favorites document.