Set Document Resolution And Contrast For A Single Copy - HP 600 User Manual

Set document resolution and contrast for a single copy

Set document resolution and contrast for a single copy
Document resolution and contrast are set in the same manner for both faxes and
copies. For most faxes and copies, default settings will work well.
If you need to send/copy a document with unusual contrast characteristics,
including images/embedded pictures, you can adjust the resolution and contrast
for that document using the control panel buttons.
You can also change the default settings for all documents using the menu.
TIP:
See
BASIC FAX menu
We recommend you use documents with a high contrast, such as, documents
printed using a high quality printer, felt tip pen, black ink, or typewriter. The
paper should be white or very light, and of normal weight, not cardboard or
onionskin.
Blue lines on a ruled pad don't fax well. For more information on the types of
paper you can use for documents, see
NOTE:
Turn the page face down and insert it into the document feeder. For more
1.
information, see
Press Resolution repeatedly to select the option you want:
2.
• STANDARD works well for printed or typewritten originals with normal-
sized characters.
• FINE is good for documents containing a lot of detail.
• SUPER FINE works well for documents containing extremely fine detail;
for example, a map or engineering drawing. SUPER FINE only works if
the remote machine also has the SUPER FINE feature.
NOTE:
memory (i.e., Broadcasting and Delayed Fax). If you are sending document
using one of these methods, SUPER FINE will be changed back to FINE even
though you selected SUPER FINE.
24 HP Fax basics
on page 13.
You must set the resolution and contrast before dialing the number.
Load documents to fax or copy
SUPER FINE mode is not used when sending documents scanned into
Document types and sizes
on page 2.
on page 23.