Front Panel; Figure 1.2 Front Panel - Fujitsu P3AM-5382-03ENZ0 Installing, Starting Up And Maintaining

Chapter 1 Product Description

1.1 Front Panel

1.1 Front Panel
The front of the ETERNUS LT20 S2 LTO library is used to access the power button, operator control panel (OCP)
with four push button switches and LCD display, the LEDs, the left and right magazines and the mailslot.

Figure 1.2 Front panel

No.
1 Left magazine with mailslot.
Power button.
2
Pressing the button will initiate a controlled Power Down of the unit (soft power down).
LED "READY" (Green).
3
Illuminated when power is on. Blinking when there is tape or library robots activity.
LED "CLEAN" (Amber).
4 Illuminated when the tape drive has determined that a cleaning cartridge should be used. Cleaning is only
necessary when the library directs you to do so. Additional cleaning is not necessary.
LED "ATTENTION" (Amber).
5
Illuminated if the library has detected a condition that requires attention by the operator.
LED "ERROR" (Amber).
6 Illuminated if an unrecoverable tape drive or library error occurs. A corresponding error message displays on the
LCD screen (see for more information).
Control key "UP" button [▲]
7
The UP button is used to navigate through menu items.
Control key "CANCEL" button.
8
The CANCEL button is used to cancel a user action and return to the last menu item.
9 Right magazine.
10 Air vents.
Control key "ENTER" button.
11
The ENTER button is used to go to a sub menu or execute an action.
Control key "DOWN" button [▼]
12
The DOWN button is used to navigate through menu items.
Front panel "OCP" display, consisting of 2x16 characters.
13 The OCP screen displays actions and status information, menu items or error messages equivalent to the
operation mode.
FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining
Description
14
Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0