Starting To Record Automatically In Response To Sound - The Vor Function - Sony ICD-BX132 Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
Menu
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-BX132
Back Back to Top
Starting to record automatically in response to sound
– the VOR function
You can set the VOR (Voice Operated Recording) function to "ON," to make the IC
recorder start recording when the IC recorder detects sound, and pause when no
sound is heard, eliminating recording during soundless periods.
1. In the stop or recording mode, press MENU to enter the menu mode.
2. Press or to select "VOR," and then press
3. Press or to select "ON," and then press
"VOR" is set to "OFF" when you purchase the IC recorder.
4. Press (stop) to exit the menu mode.
5. Press REC/PAUSE.
"VOR" and " " appear in the display window.
The recording pauses when no sound is detected and "VOR" and "PAUSE" flash.
When the IC recorder detects sound again, the recording starts again.
Descriptions of menu items
You can select one of the menu items available.
ON:
The IC recorder starts recording when it detects sound.
OFF:
The VOR function does not work.
(Initial setting)
Note
The VOR function is affected by the sound around you. Set "SENS" (microphone
sensitivity) in the menu according to the recording conditions. If recording is not
satisfactory after you have changed the "SENS" setting, or for an important
recording, set "VOR" to "OFF" in the menu.
Hint
To cancel the VOR function, set "VOR" to "OFF" in step 3.
Related Topic
81
Print
PLAY/ENTER.
PLAY/ENTER.
Go to Page Top