Starting To Record Automatically In Response To Sound - The Vor Function - Sony ICD-UX512 Operating Instructions Manual

Starting to record
automatically in response to
sound – the VOR function
You can set the VOR (Voice Operated
Recording) function to "ON," to make the
IC recorder start recording when the IC
recorder detects sound, and pause when no
sound is heard, eliminating recording
during soundless periods.
1
Select the
in the menu when the IC recorder is in
the stop or recording mode, and then
press N /ENT.
36
GB
x STOP
z REC/PAUSE
N /ENT
v , V
(Recording) tab t "VOR"
(The (FM radio)
tab is displayed only on
the ICD-UX513F.)
2
Press or on the control button to
v V
select "ON," and then press
"VOR" is set to "OFF" when you
purchase the IC recorder.
3
Press STOP to exit the menu mode.
x
4
Press z REC/PAUSE.
" " appears in the display window.
The recording pauses when no sound is
detected and "
the IC recorder detects sound again, the
recording starts again.
To cancel the VOR function
Set "VOR" to "OFF" in step 2.
P Notes
• The VOR function is affected by the sound
around you. Set "Mic Sensitivity" in the
menu according to the recording conditions.
If recording is not satisfactory after you have
changed the "Mic Sensitivity" setting, or for
an important recording, set "VOR" to "OFF"
in the menu.
• If you press z REC/PAUSE to pause
recording during VOR recording, only
" " flashes.
• During synchronized recording (page 43)
and the FM recording (page 69) (for
ICD-UX513F only), the VOR function does
not work.
/ENT.
N
" flashes. When