Installing Media Go - Sony Walkman NWZ-W273S Help Manual

WALKMAN Help guide
Getting Started
Transferring Content
Music
Settings
Troubleshooting
Important Information
Specifications
Contents list
Top page > Transferring Content > Media Go (Windows Only) > Installing

Installing Media Go

Install Media Go to your Windows computer.
1. Connect your Walkman to your Windows computer using the USB cradle
(supplied).
2. Open the "WALKMAN" folder by following one of the procedures below
depending on the operating system of your computer.
Windows 7 or earlier:
Select "start" – "Computer" or "My Computer," and select the folder
under "WALKMAN."
Windows 8:
Select "Desktop" from the "Start screen" to open "File Explorer." In the
"Computer" list, select the "WALKMAN" folder.
3. Double-click "FOR_WINDOWS."
4. Double-click "Setup" (or "Setup.exe") in the folder. The setup file is
extracted.
Depending on the version of Windows, a "User Account Control" screen
may appear. In this case, click "Yes."
5. Follow the on-screen instructions to install Media Go.
When you click "Finish" after installation, Media Go automatically starts.
Hint
During installation, you may be prompted to install additional software
components that are necessary to run Media Go. If prompted, follow the
on-screen instructions to download and install the components.
When your Windows computer is connected to the internet, the latest
version of Media Go is automatically searched and downloaded. If a
message to install the latest version of Media Go appears, click the
message and follow the on-screen instructions to install the software.
"WALKMAN Guide," which includes a list of useful links, is also installed.
Note
Depending on the environment, restarting your computer may be
required. Follow the on-screen instructions.
Copyright 2013 Sony Corporation
44
Search
Print
Media Go
Go to page top