Creating and Removing Groups
To create a new group:
To create a new group:
To create a new group:
To create a new group:
1.
Turn the camera on and turn the camera mode dial to Rev
2. Select a photo or mark the photos you want to group together. See "Marking Photos" on page 70 for more
information.
3. Press the Menu
Menu button.
Menu
Menu
4. Use the 4-way arrow button to scroll to Group
5. Press the Create
Create button (left soft key).
Create
Create
Note:
The Create
Create button is available only when there are no existing
Create
Create
groups. If there are existing groups, press the Add
soft key), then press Create New
6. Name the new group. Group names must be eight characters or less and cannot contain spaces.
•
Use the up and down sides of the 4-way arrow button to scroll to the letter you want to use.
•
Use the right side of the 4-way arrow button to add a letter to the name.
•
Use the left side of the 4-way arrow button to delete a letter from the name.
Note:
The camera does not accept group names that begin with BR or TL because these letters are reserved,
regardless of language, for identifying Burst and Timelapse photos on the memory card.
HP PhotoSmart C500 Digital Camera User's Guide
Rev.
Rev
Rev
Group.
Group
Group
Add button (left
Add
Add
Create New (center soft key).
Create New
Create New
Using Review Mode
76