Taking Still, Burst And Timelapse Photos; Taking Still Photos - HP PhotoSmart C500 User Manual

Taking Still, Burst and Timelapse Photos

Taking Still Photos

Use the Still Still setting to take one photo each time you press the Shutter
Still Still
To take a Still photo: To take a Still photo: To take a Still photo: To take a Still photo:
1. Remove the lens cover.
2. Turn the camera on and turn the camera mode dial to Rec
The status LCD displays the approximate number of photos
available on the memory card. The camera is not ready until
this number appears.
3. Adjust your camera settings as needed. See "Adjusting the
Camera Settings" on page 42 for details.
4. Press the color LCD on/off color LCD on/off button to turn the color LCD on, then press the left soft key until the
color LCD on/off color LCD on/off
Still icon appears on the lower overlay bar. Still Still Still
Tip: To conserve battery power, turn the color LCD off after you choose the photo type.
5. Frame your subject in the viewfinder, then press and hold the Shutter
to adjust the focus and exposure. If you see an orange light to the left of the viewfinder, you may need to
change the flash setting to adjust for the lighting conditions.
HP PhotoSmart C500 Digital Camera User's Guide
Taking Still, Burst and Timelapse Photos
Shutter button.
Shutter Shutter
Number of
photos available
Rec.
Rec Rec
Status LCD Camera mode dial
Shutter button 1/2 way down to allow the camera Shutter Shutter
Shutter button
On/off button
Still icon
35