To change the Burst rate:
To change the Burst rate:
To change the Burst rate:
To change the Burst rate:
1.
Turn the camera on and turn the camera mode dial to Rec
2. Press the Menu
Menu button.
Menu
Menu
The color LCD displays the Media Settings
3. Use the 4-way arrow button to scroll to Burst
4. Press the Edit
Edit
Edit button (left soft key), and then scroll down to Burst Rate
Edit
5. Use the 4-way arrow button to choose the desired setting, from 1 to 3
frames per second.
6. Press the Exit
Exit
Exit button (right soft key) twice to save your settings and exit the menus.
Exit
Taking Timelapse Photos
Use the Timelapse setting to take a series of photos at preset time intervals. You can specify the number of photos
you want the camera to take, as well as the amount of time between photos. It is recommended that you attach the
camera to a tripod, or place it on a firm surface at an appropriate distance and height from the subject, to keep the
camera steady.
It is recommended that you use an AC power adapter for long Timelapse photo sequences. See "Using an AC Power
Adapter (recommended)" on page 29 for more information.
Tip:
By default the camera takes 10 photos with 1 minute intervals between photos. If you want to change the
Timelapse settings, see below.
HP PhotoSmart C500 Digital Camera User's Guide
Rec
Rec.
Rec
Media Settings menu.
Media Settings
Media Settings
Burst.
Burst
Burst
Taking Still, Burst and Timelapse Photos
Burst Rate
Burst Rate.
Burst Rate
38