Sanyo Power Vision SCP-8400 User Manual page 220

Setting Vibrate Pattern for Sprint PCS
Ready Link Calls
You can select your favorite vibrate pattern for Sprint PCS
Ready Link calls.
To select a vibrate pattern for Sprint PCS Ready Link calls:
1.
Select
Vibrate Pattern.
2.
Select Ready Link Calls or R-Link Missed.
3.
Scroll to a pattern and press
Setting an Alert Notification for Sprint PCS
Ready Link Calls
Your phone can alert you with an audible tone when you
receive a Sprint PCS Ready Link call.
To set alerts for Sprint PCS Ready Link calls:
1.
Select
2.
Select Ready Link Calls, R-Link Missed, or Headset Alert.
3.
Use the navigation key to select an option.
Tip:
Headset Alert setting is available when the Turbo Button setting is set
for Ready Link use. (See "Setting Headset Mode"on page 79.)
To adjust the floor tone volume:
1.
Select
2.
Select Floor Tone Vol. > Earpiece or Speaker.
3.
Using the navigation key, choose a volume level and
press
204 Section 2K: Using Sprint PCS Ready Link
> Settings > Ready Link > Sounds >
> Settings > Ready Link > Sounds > Alerts.
> Settings > Ready Link > Sounds > Alerts.
.
.