Sanyo Power Vision SCP-8400 User Manual page 174

Sprint power vision phone
Hide thumbs Also See for Power Vision SCP-8400:
Table of Contents

Advertisement

Setting the Self-Timer
To activate the self-timer:
1.
From camera mode, select Options (right softkey) >
Self-Timer.
2.
Highlight the length of delay you want the timer to use
(10 Seconds or 5 Seconds) and press
3.
Select Start (left softkey) when you are ready to start the
timer. (
Main LCD during the self-timer countdown.)
4.
Get ready for the picture. (When the timer is down to
three seconds, the self-timer icon will turn red and the
phone will begin to beep.)
To cancel the self-timer after it has started:
Press Cancel (right softkey).
Note:
While the self-timer is active, all keys are disabled except
and Cancel (right softkey).
158
Section 2J: Using Your Phone's Built-in Camera
appears on the upper right portion of the
.
,
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scp-8400

Table of Contents