Sanyo Power Vision SCP-8400 User Manual page 197

Sprint power vision phone
Hide thumbs Also See for Power Vision SCP-8400:
Table of Contents

Advertisement

5.
When you have finished selecting the printer settings,
press Print (right softkey).
6.
When printing is finished, press
7.
Select Yes. Follow the instructions on the display to
unplug the USB cable from the phone.
Note:
While you are connected to the printer, your phone's screen will
display "Phone Off."You cannot make or receive calls during this time.
Note:
Make sure your battery is fully charged before using the PictBridge.
Note:
Pictures not taken on this phone may not be printable.
PictBridge Error Messages:
printing problems. Any printer error messages will be displayed on your
phone, informing you of the specific problems encountered. Please refer to
the user's guide that came with your printer for descriptions, explanations,
and possible resolutions for any error messages.
Section 2J: Using Your Phone's Built-in Camera
From time to time you may encounter
.
181

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scp-8400

Table of Contents