SOYO SY-5SSM Quick Start Manual page 11

Step 7. Enable/Disable the Onboard Sound (JP9)
The onboard audio features of your Motherboard are controlled by jumpers JP9
Choose the available sound options among the following table:
Sound Settings
Onboard Sound: Enable
Onboard Sound: Disable
Step 8. Clear CMOS Data (JP5)
Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5, and then by
shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white
colored cap.
CMOS Clearing
Short pin 2-3 for a
JP5 Setting few seconds to
clear the CMOS
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
SY-5SSM Quick Start Guide
Clear CMOS Data
1 2 3
11
JP9
short
open
Retain CMOS Data
Short pin 1-2
to retain new
settings
1 2 3