Option
Advanced Boot Options
Date/Time
Table 3. System Configuration
Option
Integrated NIC
Parallel Port
Serial Port
SATA Operation
Drives
Description
Allows you to configure your system for
legacy boot mode. The option is enables
by default.
Allows you to set the date and time.
Description
Allows you to configure the integrated
network controller. The options are:
•
Disabled
•
Enabled
•
Enabled w/PXE (Default Setting)
Allows you to define and set how the
parallel port on the docking station
operates. You can set the parallel port
to:
•
Disabled
•
AT (Default Setting)
•
PS2
•
ECP
Identifies and defines the serial port
settings. You can set the serial port to:
•
Disabled
•
COM1 (Default Setting)
•
COM2
•
COM3
•
COM4
NOTE: The operating system may
allocate resources even if the
setting is disabled.
Allows you to configure the internal
SATA hard-drive controller. The options
are:
•
Disabled
•
ATA
•
AHCI
•
RAID On (Default Setting)
NOTE: SATA is configured to
support RAID mode.
Allows you to configure the SATA drives
on board. The options are:
•
SATA-0
•
SATA-1
59