Using Your Camera - HP Photosmart M437 User Manual

To learn about Windows Vista support for your camera, see
windowsvista
Windows:
1. Close all programs and temporarily disable any virus protection software.
2. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen
instructions. If the installation screen does not appear, click Start, click Run, type D:
\Setup.exe, where D is the letter of your CD drive, then click OK.
3. When the software has finished installing, re-enable virus protection software.
Macintosh:
1. Insert the HP Photosmart Software CD into the CD drive.
2. Double-click the CD icon on the computer desktop.
3. Double-click the installer icon, then follow the on-screen instructions.
Once installation is complete and you have restarted your computer, System
Preferences automatically opens to the HP Photosmart Camera settings. You may
change settings so the HP Photosmart Software starts automatically when you connect
your camera to your Macintosh (click the help button on the HP Photosmart Camera
settings dialog for more information).

Using your camera

Now that you've completed setup, you can take and review pictures and video clips.
For information on taking pictures and recording
video clips
For information on setting picture capture and
video record settings
For information on reviewing images and video
clips on the camera
For information on enhancing your images
For information on transferring images from
your camera to a computer
For information on printing images
TIP: To switch between
Playback, slide
(English only).
Picture Capture,
to the desired option.
www.hp.com/go/
See "Taking pictures" on page 8
"Recording video clips" on page 9
See "Setting options for taking pictures and
recording video clips" on page 13
See "Reviewing images and video clips"
on page 17
See "Using the Design Gallery Menu"
on page 21
See "Transferring images with HP Photosmart
Software" on page 23
See "Printing images directly to a printer"
on page 25
Video Record, and
Using your camera
and
7