Install And Format An Optional Memory Card; Install The Software - HP Photosmart M437 User Manual

Chapter 1

Install and format an optional memory card

Your camera supports standard, high speed and high capacity Secure Digital (SD and
SDHC) memory cards, 32MB to 8GB.
1. Turn off the camera and open the
Battery/Memory Card door.
2. Insert the memory card in the
smaller slot as shown. Make sure
the memory card snaps into
place.
3. Close the Battery/Memory Card
door and turn on the camera.
NOTE: When you turn on your
camera with a memory card
installed, the camera indicates the
number of images you can put on
the memory card at the current
Image Quality setting. This
camera supports storing a
maximum of 4000 images on a
memory card.
Always format new memory cards before first use. Formatting removes all images from
the memory card, so make sure to transfer existing images before formatting (see
"Transferring and printing images" on page
1. With the camera turned on, slide
2. Press
.
3. Use
4. Use
NOTE: Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view images
stored there, turn off the camera then remove the memory card. To transfer images
from internal memory to an optional memory card, see Move Images to Card
under "Using the Playback Menu" on page
For information about supported memory cards, see

Install the software

The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, and more).
To install the HP Photosmart Software, your computer must meet the system
requirements as stated on the camera packaging.
If you have trouble installing or using the HP Photosmart Software, see the Hewlett-
Packard Technical Support website for more information: www.hp.com/support. To
optimize your digital photography experience, periodically check this website for updates
to your camera's software, drivers, and firmware.
6 Getting started
to select Format Card, then press
to select Yes, then press
23).
to .
.
to format the card.
18.
"Storage" on page 43.