Advertisement
Sighting
The front of the base is notched to provide
two guide edges.
For straight cuts, align the edge with 0"
engraved on
it
with your cutting line on
the workpiece.
For 45" bevel cuts, align the edge with 45"
engraved on
it
with your cutting line.
Switch action
To
prevent the trigger from being acciden-
tally pulled,
a
lock-off
lever i s
provided.
To start the tool, slide the lock-off lever
in the direction of the arrow and pull the
trigger. Release the trigger to stop.
/
Top guide
-
For
45"
bevel cuts
: :
For sttaight cuts
c~~~~~~
l i n e
Fig
Switch
ti
igger
7,
!\Lock-off
l w e i
1
Fig. 1
CAUTION
:
Before inserting the battery cartridge into the tool, always check to
see
that the switch
trigger actuates properly and returns to the "OFF" position when released
Operation
Hold the tool firmly.
Set
the base plate on
the workpiece to be cut without the blade
making any contact. Then turn the tool on
and wait until the blade attains full speed.
Now simply move the tool forward over
the workpiece surface, keeping i t flat and
advancing smoothly until the sawing
i s
completed. To
get
clean cuts, keep your
I
i-
.
Base
sawing
line straight
and
your speed
of
advance uniform.
I
Fig. 1
CAUTION
:
.Always gently keep the tool moving straight ahead when cutting. Forcing or twisting the
tool will result in overheating of the motor and dangerous kickback, possibly causing
severe injury.
If the tool is operated continuously until the battery cartridge has discharged, allow the
tool
to rest for 15 minutes before proceeding with
a
fresh battery.
13
Advertisement
