Connection Status - NETGEAR CBVG834G Adminstrators User Manual

Wireless Cable Voice Gateway Model CBVG834G Adminstrators User Manual
Table 4-1. Gateway Status Screen Settings (continued)
Setting
Software Version
Cable MAC Address
Device MAC Address
Cable Modem Serial
Number
CM Certificate
System Up Time
Network Access
Device IP Address

Connection Status

Note: To view the Connection Status screen you must log in as MSO.
4-2
Description
The software version of the gateway.
The MAC address used by the cable modem port of the gateway. This
MAC address may need to be registered with your cable service
provider.
The MAC address of the gateway. This is the equivalent of your PC
when connected to a cable modem. You can use the MAC cloning
feature to replace this MAC address with another address when
sending packets to the WAN.
The serial number of the gateway hardware.
If the cable modem certificate is Installed, it is possible for the service
provider to upgrade your Data Over Cable service securely.
The time since the gateway has registered with your cable service
provider.
This field will change to Allowed when the registration with your cable
service provider is complete.
The IP address of the gateway, as seen from the Internet.
v1.0, February 2008
Managing Your Network