Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual page 490

Appendix
Using the Indicate CSS button
Ê Shut down and power off the server.
Ê Disconnect the AC power cord from the system.
I
It is mandatory to disconnect power cords in order to use the Indicate
CSS functionality.
Ê Press the Indicate CSS button (1) to highlight defective components.
Component LEDs
I
LEDs A, B and C are visible from the outside on the server rear. All other
LEDs are only visible if the top cover has been opened. In order to
access fan LEDs (O), the fan modules need to be removed.
Indicator
A Identification
CSS
B (Customer Self
Service)
GEL
C (Global Error
LED)
F Controller
G CPU
490
Status Description
server has been highlighted using the ID
blue on button on the front panel for easy
identification
server has been highlighted using IRMC
blue
(AVR) when local VGA off for easy
flashing
identification
off no critical event (CSS component)
yellow on prefailure detected (CSS component)
yellow
CSS component failure
flashing
off no critical event (non CSS component)
prefailure detected (non CSS
orange on
component)
non CSS component failure
Possible reasons:
orange
– sensor reports overheating
flashing
– sensor is defective
– CPU error
– software reports an error
orange on controller faulty
orange on CPU faulty
Upgrade and Maintenance Manual
RX300 S8