Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual page 411

Ê Fit the new UFM on the UFM connector and the remaining UFM spacer (1).
Ê Secure the UFM to the UFM spacer with the nylon screw (2).
Destroying the defective UFM
V
CAUTION!
The UFM contains customer information (e.g. IP address, license
numbers). After replacing the UFM, hand the defective UFM over to the
customer. If the customer requests disposal of the defective UFM,
proceed as follows:
Figure 272: Destroying the defective UFM
Ê Use a pair of combination pliers (1) and flat nose pliers (2) to break
the UFM in half as shown.
RX300 S8
Upgrade and Maintenance Manual
System board and components
411