Using the camera with a Macintosh
computer
You can transfer the images in your digital camera to a Macintosh
computer.
System requirements for a Macintosh
computer
To work with your camera, your Macintosh computer must meet or
exceed the following requirements. For updated system
requirements, go to www.hp.com/photosmart.
Operating system
Processor
Memory (RAM)
Free hard disk space
Video display
CD-ROM
Interface
Changing the USB protocol setting
Before you can unload images from the camera to a Macintosh
computer, you must change the USB protocol setting to MSDC in
the Setup menu on the camera's image display.
To change the USB protocol setting
1 Press the
2 Press the
down side of the
then press
3 Use the up or down side of the
Sharing and printing images
Macintosh OS 8.6 or later
Power PC, 233 MHz
OS 8.6 or OS 9: 64 MB
OS X: 128 MB
150 MB
800 by 600 pixels, 16-bit color
Any speed
USB port
button to turn on the image display.
button again to open the main menu, use the
controller to select the Setup menu, and
.
OK
controller to scroll to USB.
35