Central Pneumatic 93786 Assembly And Operating Instructions Manual page 4

18. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
Note: Performance of this Air Compressor Pump may vary depending on variations
in local line voltage or motor capacity. Extension cord usage may also affect
tool performance.
19. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
20. Use proper size and type extension cord. If an extension cord is required,
it must be of the proper size and type to supply the correct current to the tool
without heating up. Otherwise, the extension cord could melt and catch fire, or
cause electrical damage to the tool. Longer extension cords require larger
size wire. If you are using the tool outdoors, use an extension cord rated for
outdoor use. (signified by "WA" on the jacket). Check with the manufacturer of
the electric motor (not included) for the proper power supply requirements.
21. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
22. Pacemaker safety warning. People with pacemakers should consult with
their physician(s) before using this electric powered equipment; operation of
equipment in close proximity to a heart pacemaker could cause interference
or failure of the pacemaker.
The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
NOTE: This item must be properly mounted on a strong, level surface which is capable
of holding the compressor weight, and the forces put on it during operation. A properly
sized motor (not included) must also be mounted on a level and sufficiently strong
surface. The motor and pump must be connected with V shaped drive belts (not
included). The drive belts must be completely enclosed in a sturdy belt cover (not
included).
WARNING: By supplying this air compressor, Harbor Freight Tools makes no
representations and accepts no responsibility for the motor, V-belt, enclosure or
mounting surface not supplied by HFT which may be used in the installation. You are
strongly advised to have this air compressor properly installed by a qualified service
technician using appropriate components in good condition.
WARNING: The brass components of this product contain lead, a chemical known to
the State of California to cause birth defects (or other reproductive harm). (California
Health & Safety code § 25249.5, et seq. )
For technical questions please call 1-800-444-3353
SKU 93786 Page 4