iHome iBT28 Quick Start Manual page 10

Color Change Mode can be accessed whether the unit is ON or OFF. There are 5 color settings. Press the Color Button
to cycle through them. The settings are:
• GLOW Slow color change (default): Colors slowly fade from one to another through the color spectrum.
• 1 COLOR Select the current color by pressing the Color Button when the desired color is showing in Glow mode.
• PULSE Light flashes/changes to the beat of playing music
• FAST Fast color change: colors change quickly from one to another through the color spectrum.
• OFF Turns off cabinet color effect.
TIP: To adjust the brightness of the colors, press the Snooze/Dimmer Button (not active in GLOW mode).
When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle through High, Medium, Low,
and Off brightness settings. Settings affect both the display and cabinet LED. Dimmer function will not work during GLOW
color change mode. When LED color mode is set to OFF, pressing the Snooze/Dimmer Button will place unit in 1 COLOR
mode with white backlight.
This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns the unit
off.
1. Press and release the Sleep Button as needed to cycle to the desired sleep setting: 120, 90, 60, 30, 15 minutes or Off
(cancels sleep mode).
2. To set sleep volume, press the
3. During sleep mode, press the Sleep Button to view the sleep time remaining. Press again to set sleep to the next lowest
setting.
4. To cancel sleep mode and turn the unit off, press and release the
In Bluetooth mode, the unit has an auto shut-off feature. If no Bluetooth audio is detected for 3 minutes, the unit will power
off. This feature does not apply in Aux or FM radio modes.
Color Change Mode
Dimmer Mode
Bedtime Sleep Mode
or Buttons. Sleep volume does not effect normal or alarm volume settings.
Auto Shut-off
Button at any time during sleep mode.
7