Table of Contents
Advertisement
Setting up the appliance
Before using the machine for the first time, wash all the acces-
sories in warm soapy water and rinse. For the best tasting coffee
the internal circuits must be flushed through at least five times. To
do this follow the instructions in the paragraphs "Filling the water
tank" and "preheating the coffee machine" using just water
and without coffee.
Installation
• Place the coffee maker on flat work surface at a safe distance
from taps and sinks.
• Check that the voltage corresponds to that indicated on the
appliance rating plate. The appliance must always be connected
to a well-earthed socket rated at 10A minimum. The manufac-
turer is not liable for damage caused by inadequate earthing of
the appliance.
• If the cable is damaged or requires replacing, contact Customer
Services (refer to guarantee leaflet).
• Never install the machine in an environment that can reach a
temperature less than or equal to 0°C (if the water in it
freezes, the coffee maker may be damaged).
Electrical connection
Important - Uk only
·
The wires in the cord are coloured as follows:
Green and Yellow = Earth
Blue = Neutral
Brown = Live.
·
The appliance must be protected by a 13A approved (BS1362)
fuse.
·
Warning: this appliance must be earthed.
Note:
·
For non-rewireable plugs the fuse cover MUST be refitted when
replacing the fuse. If the fuse cover is lost then the plug must not
be used until a replacement can be obtained. The correct fuse
cover is identified by colour and a replacement may be obtained
from your De'Longhi Authorised Repairer.
·
If a non-rewireable plug is cut off it must be destroyed immedia-
tely. An electric shock hazard may arise if an unwanted non-rewi-
reable plug is inadvertently inserted into a 13A socket outlet.
·
This appliance complies with European Economic Community
Directive 89/336/EEC.
Coffee Maker
4
Hide quick links:
Advertisement
Table of Contents
