Advertisement
Punch LED PRO
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use a soft cloth to wipe down the outside casing.
2. Clean the external optics with a soft cloth every 20 days.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Punch LED PRO
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact American DJ® for service.
1-800-322-6337
American DJ Supply
- www.americandj.com - Punch LED PRO Instruction Manual Page 11
©
®
Cleaning
1-YEAR LIMITED WARRANTY
A. American DJ
free of manufacturing defects in material and workmanship for a period of 1 Year (365 days)
from the date of purchase. This warranty shall be valid only if the product is purchased
within the United States of America, including possessions and territories. It is the owner's
responsibility to establish the date and place of purchase by acceptable evidence, at the
time service is sought.
B. For warranty service, send the product only to the American DJ
charges must be pre-paid. If the requested repairs or service (including parts replacement)
Trouble Shooting
are within the terms of this warranty, American DJ
to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package. No accessories should be shipped with the product. If any
accessories are shipped with the product, American DJ
for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is
modified in any manner which American DJ
ability of the product; if the product has been repaired or serviced by anyone other than
the American DJ
American DJ
the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specified above, American DJ
tive parts at its expense, and will absorb all expenses for warranty service and repair labor
by reason of defects in material or workmanship. The sole responsibility of American DJ
under this warranty shall be limited to the repair of the product, or replacement thereof,
including parts, at the sole discretion of American DJ
ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.
E. American DJ
its products without any obligation to include these changes in any products theretofore
manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any acces-
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ
ing warranties of merchantability or fitness, are limited in duration to the warranty period
set forth above. And no warranties, whether expressed or implied, including warranties
of merchantability or fitness, shall apply to this product after said period has expired. The
consumer's and or Dealer's sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall American DJ
damage, direct or consequential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American DJ
supersedes all prior warranties and written descriptions of warranty terms and conditions
heretofore published.
H. Lamps are not covered under this or any other warranty, either written or implied.
©
Punch LED PRO
hereby warrants, to the original purchaser, American DJ
®
factory unless prior written authorization was issued to purchaser by
®
; if the product is damaged because not properly maintained as set forth in
®
reserves the right to make changes in design and/or improvements upon
®
American DJ Supply
- www.americandj.com - Punch LED PRO Instruction Manual Page 12
®
Warranty
products to be
®
factory. All shipping
®
will pay return shipping charges only
®
shall have no liability whatsoever
®
concludes, after inspection, affects the reli-
®
will replace defec-
®
. All products covered by this war-
®
in connection with this product, includ-
®
be liable for any loss or
®
Products and
®
®
Advertisement
