Advertisement
Punch LED PRO
Mode, and the other is a 6 Channel Mode. Operating through a DMX
controller give the user the freedom to create their own programs tai-
lored to their own individual needs. Operating through a DMX control-
ler give the user the freedom to create their own programs tailored to
their own individual needs. This function also allows you to use your
fixtures as spot lights.
1. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller such as the
Elation
Show Designer™ or the Elation
®
2. The Punch LED PRO uses three or six DMX channels to operate.
Please see pages 9-10 for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller. Follow the set-up
specifications that come with your DMX controller.
4. To run the 3 Channel Mode, press the MODE button until "001"
with a small dot underneath the last number is displayed. This is
the DMX addressing for the 3 Channel Mode. Set your desired
DMX address.
5. To run the 6 Channel Mode, press the MODE button until "001"
is displayed. This is the DMX addressing for the 6 Channel Mode.
Set your desired DMX address.
Please below for example
3 Channel Mode
Punch LED PRO
DMX Values and Functions - 3 Channel
Channel
Value
1
0 - 255
2
0 - 255
3
0 - 255
American DJ Supply
- www.americandj.com - Punch LED PRO Instruction Manual Page 9
©
®
Operating Instructions
DMX Operator.™
®
6 Channel Mode
Function
RED
0%
100%
GREEN
0%
100%
BLUE
0%
100%
Punch LED PRO
DMX Values and Functions - 6 Channel
Channel
Value
1
0 - 255
2
0 - 255
3
0 - 255
4
0 - 7
8 - 255
5
0 - 15
16 - 255
6
0 - 31
32 - 63
64 - 95
96 - 127
128 - 159
160 - 191
192 - 223
224 - 255
• Channels 1, 2, and 3 will only work with Channel 5, when
Channel 6 is not being used. Channels 4 & 5 work together.
• Channels 1, 2, and 3 will not work, when Channel 4 is being
used. When units are daisy chained together in DMX Mode,
channels 1, 2, and 3 must be "OFF" for units to sync together
when using Channel 4. Channels 4 & 5 work together.
• When the values of Channel 6 are between 32 and 127, you
must be using Channels 1, 2, 3, or all three combined. Chan-
nels 4 & 5 will not work
• When the values Channel 6 are between 128 and 223, Chan-
nel 5 will control the speed of the color mixing and changing.
• When the values of Channel 6 are between 224 and 255
(Sound Active), Channel 5 will control sound sensitivity.
American DJ Supply
- www.americandj.com - Punch LED PRO Instruction Manual Page 10
©
®
Function
RED
0%
100%
GREEN
0%
100%
BLUE
0%
100%
NOTHING
COLOR MACRO
NOTHING
STROBING
NOTHING
DIMMING CONTROL
DIM
BRIGHT
BRIGHT
DIM
DIM
BRIGHT
DIM
COLOR MIXING
3 COLOR CHANGE
7 COLOR CHANGE
SOUND ACTIVE
Advertisement
