1
Preparations
1.3
Installation
1.3.1 Attaching the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Insert the stand neck into the
stand base in the direction
shown in the figure.
Place a soft cloth over the table
to protect the product and place
the product onto the cloth so
that the front of the product is
facing downwards.
Check that the stand neck is
firmly connected.
Put the headphone holder in the
place shown by figure.
Tightly fasten the connecting
screw at the bottom of the stand
base.
Turn the connecting screws fully
so that it is completely fixed.
1 Preparations
23