E-Mail Configuration - Planet ICA-HM350 User Manual

3.11 E-Mail Configuration

You may setup SMTP mail parameters for further operation of Event Schedule. That's, if users
want to send the alarm message out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP Server:
Test:
SMTP Port:
SMTP Authentication:
Authentication User
Name:
Authentication
Password:
E-mail From:
Type the SMTP server name or the IP address of the SMTP server.
Send a test mail to mail server to check this account is available or
not.
Set port number of SMTP service.
Select the authentication required when you send an e-mail.
Disable: If no authentication is required when an e-mail is send.
Enable: If authentication is required when an e-mail is sent.
Type the user name for the SMTP server if Authentication is Enable.
Type the password for the SMTP server if Authentication is Enable.
Type the sender's E-mail address. This address is used for reply
e-mails.
61