Fujitsu SCALEOVIEW S17-2 Operating Manual page 73

Glossary
Nozzle Hook
In the boot area on the unit; place upon which the nozzle rests when the unit is not in use.
O
Occupational Safety and Hazard Administration (OSHA)
U.S. agency that develops and enforces regulations for the safety and health of workers
engaged in interstate commerce.
Operation Mode
Configuration of the unit that determines whether authorization and payout occurs at the
console (Two-wire mode) or at the unit (standalone mode).
Oven Door
Oven door on the unit that provides access to the Manager's Keypad and some electrical
components of the unit.
P
Personal Identification Number (PIN)
Password used by the Station Manager to program the unit; different PINS are used for
different levels of programming.
Price Per Unit (PPU)
The price of each unit of gasoline dispensed.
Programmable Pump Preset (PPP)
Feature that allows customers or attendants to preset the dollar or volume amount of a
transaction before fueling.
Programming Commands
Programming commands used to configure settings on the unit; most commonly configured on
site by the station owner or operator
Pump
A device that uses a self-contained pumping unit and motor to move fuel from the storage
tank.
Pump Controller
Refer to "Console" on Glossary-2.
Pump Pulleys
Ordinary pulley wheels used on self-contained suction pumps and motors.
MDE-3893P Encore® and Eclipse® Series Owner's Manual · December 2011 Glossary-5