Fujitsu SCALEOVIEW S17-2 Operating Manual page 46

Maintaining Units
Recommended
Frequency
When other
components are
serviced
Every six months
(annually for
Encore 550) or if
fuel inventory
discrepancies
exist.
For Units with Ecometer
Yearly
For Units Equipped with DEF
Once a week,
especially during
cold weather
After a DEF spill
occurs
Page 42
Components Recommended Maintenance
Eclipse unit Look for loose fiberglass skins, missing brackets,
fiberglass and missing mounting hardware.
Note: If repair is required, call an ASC/CSC.
WARNING
Do not attempt to make these repairs yourself. Doing so could
result in severe injury or death.
Meter Have the unit meters checked for proper calibration
Calibration and corrected as required. High volume stations
may require more frequent calibration checks when
compared to the low volume stations.
Ecometer Have the unit meters checked for proper calibration
Calibration and corrected as required. Ecometers with proper
air purging during installation will not generally vary
from initial calibration settings.
DEF Hose Verify if the hose retrieves properly. Verify if the
Retriever and nozzle door opens and closes properly. From a half-
Nozzle Door way lifted position, the door must close completely
Mechanism unassisted, after the nozzle has been placed back
into the nozzle holder.
CAUTION
During cold weather, a hose retriever that does not retract
properly or a nozzle door that does not self close properly may
cause freezing of the nozzle, hose, or other components. This
prevents DEF from being dispensed or may cause damage to
components that results in leaks.
Dispenser and Flush the DEF spill with water and dry the area with
surrounding clean rags, especially areas that contain metallic
metallic parts.
components
Note: Spilled DEF can be slippery and will corrode
metallic parts.
CAUTION
DEF is mildly corrosive. Handle with care. Wear eye protection
and rubber gloves during any cleanup activity.
MDE-3893P Encore® and Eclipse® Series Owner's Manual · December 2011
Periodic Inspections
Who Performs the
Inspection/Repair
• Owner—Inspect
• ASC/CSC only—Repair
CAUTION
• Owner—arranges for
service
• ASC/CSC—tests and
re-calibrates, if required
• Owner—arranges for
service
• ASC/CSC—tests and
re-calibrates, if required
• Owner— Inspect
• ASC— Repair
CAUTION
Owner