Lenovo E10-30 Hardware Maintenance Manual page 56

Lenovo E10-30 Hardware Maintenance Manual
Figure 10. Removal steps of base cover, speakers, power assembly and USB board
(continued)
Remove the power assembly in the direction shown by arrow
When installing: Make sure that the power connector is attached firmly.
Remove the screw
e
52
d
. Remove the USB board in the direction shown by arrow
.
d
e
Step Screw (quantity)
a M2.0 × 3 mm, flat-head, nylok-coated (1)
c
.
c
Color Torque
Black 1.85+/-0.15kgfcm