HP f1905 User Manual page 60

Troubleshooting
Problem
Image is not
centered.
"No Connection,
Check Signal Cable"
displays on screen.
"Out of Range."
A–2
Possible Cause
Position may need
adjustment.
Monitor video cable is
disconnected.
Video resolution and
refresh rate are set
higher than what your
monitor supports.
Solution
Press the Menu button to
access the OSD menu.
Select Image Control/
Horizontal Position or
Vertical Position to adjust
the horizontal or vertical
position of the image.
Connect the monitor video
cable to the VGA connector
on the computer, or connect
the DVI-D (select f monitor
models only) signal cable
(sold separately) to the DVI
connector on the computer.
Be sure that the computer
power is off while
connecting the video cable.
Restart your computer and
enter Safe Mode. Change
your settings to a supported
setting (see the table in
"Pre-set Video Modes" in
Appendix B). Restart your
computer so that the new
settings take effect.
User's Guide