HP f1905 User Manual page 32

Setting Up the Monitor
4. Save the removed items (screws, back cover, and
pedestal-base assembly) for future use.
5. Mount the f monitor to a swing arm or other mounting fixture.
6. The four threaded mounting holes on the monitor panel are
spaced 100 mm apart and are compliant with the VESA
standard for mounting flat-panel monitors.
7. Use the four holes to attach a swing arm or other mounting
fixture. Follow the instructions included with the mounting
fixture, to ensure that the monitor is safely attached.
8. Assemble the speakers. Refer to "Assembling the f Monitor
Satellite Speakers" in this chapter.
To reinstall the desktop pedestal-base assembly for the f monitor:
1. Remove the mounting fixture.
2. Reverse the preceding instructions to attach the pedestal-base
assembly onto the panel (be sure to insert the top two screws
first), and then replace the rectangular back cover and snap it
into place on the monitor.
3–12 User's Guide