Dremel 398 Operating/Safety Instructions Manual page 21

The machine-screw threading on Mandrel No. 424 threads into polishing point No. 427. This and other
threaded mandrels must be screwed firmly down to the collar before being used.
To replace a band on the Drum Sander, loosen the screw without removing it to contract the drum then slide
the old band off. Slide the new sanding band on and then expand the drum by tightening the screw once again.
Before each use, check to make certain that all components are assembled to accessory
!
W W A A R R N N I I N N G G
shank and that the drum is sufficiently expanded to secure the band during use. If sanding
band is loose on the drum during operation it may "fly" off and strike you or bystanders.
565
Multipurpose Cutting Kit
• Includes 2 drywall cutting bits (560) and 1 spiral
cutting bit (561)
• Cuts fiberglass, wood & drywall easily
Questions or Problems? Call 1-800-437-3635
Dremel Attachments
Page 21
566
Tile Cutting Kit
• Includes 1 ceramic tile cutting bit (562)
• Cuts ceramic wall tile to any shape