Remote Access Code; Message Alert Tone - VTech DS6673-2 User Manual

Answering system settings

Remote access code

A two-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can set the code from
00 to 99.
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then
2. Press or
press SELECT.
to scroll to Ans sys setup, then
3. Press or
press SELECT.
to scroll to Remote code, then press SELECT.
4. Press or
5. Use the dialing keys to enter a two-digit number, then press
SELECT to save. You hear a confirmation tone.
Press DELETE to backspace and erase a digit.
•
Press and hold DELETE to erase the entire entry.
•
• Press or

Message alert tone

When the message alert tone is set to on, and there is at least one new
message, the telephone base beeps every 10 seconds. The message alert tone
is preset to off.
There is no audible alert at the handset.
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then
2. Press or
press SELECT.
3. Press or to scroll to Ans sys setup, then
press SELECT.
to scroll to Msg alert tone, then
4. Press or
press SELECT.
to choose On or Off.
5. Press or
Press SELECT to save and you hear a confirmation tone.
6.
The answering system must be turned on for message alert tone
to be functional.
to move the cursor to the left or right.
66
# of rings
>Remote code
REMOTE CODE
19
Remote code
>Msg alert tone
MSG ALERT TONE
>Off