Installation; Connecting Two Pcs To The Monitor - Eizo ColorEdge CG222W User Manual

2. Installation

. Installation

-1. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor.
Connection examples
(Ex.1) Digital
(Ex.2) Analog
Selecting input signal
Switch the input signal with . Input signal switches each time is pressed. When the signal is
switched, the active signal type (Signal 1 or 2/ Analog or Digital) appears at the top right corner of the
screen.
This function is used to select which PC will have priority to control the monitor when utilizing two PCs.
The monitor constantly checks the input signals and switches automatically in accordance with the
<Input Priority> setting (see table below). Once a priority is set, whenever a change of signal is detected
at the selected input, the monitor will switch the input to that signal.
In this case of only one signal being present at either input, the monitor automatically detects and
displays that signal.

SIGNAL1
PC 1
Signal Cable
(FD-C39 enclosed)
DVI
Signal Cable
D-Sub
(FD-C16 enclosed)
mini 15
pin
Input Signal Selection button
SIGNAL2
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional)
PC 
D-Sub
mini 15 Analog
pin
D-Sub
mini 15 Analog
pin