Step 4:
Slide one Bearing Housing (211) onto each
side of the axle on the Rear Leg Press Support
(208). Attach each Bearing Housing (211) to
the Leg Press Main Frame (201) using two 1/2"
x 1-3/4" Hex Head Bolts (227), four 1/2"
Washers (234) and two 1/2" Nylon Nuts (236).
Attach the Front Leg Press Support (207) to
the sleeve on the Leg Press Main Frame (201)
using one Axle (225), two 1/2" Washers (234)
and two 1/2" Nylon Nuts (236).
208
227
227
234
234
211
207
236
234
211
234
236
201
225
234
234
236
236
-9-