Table of Contents
Advertisement
Step 3:
Slide one 1" x 130 mm Hand Grip (214)
onto each Seat Handle Bar (206).
Should you find the Hand Grips (214)
difficult to slide on, try applying a small
amount of soapy water to the Seat
Handle Bars (206) prior to sliding on the
Hand Grips (214).
218
220
213
Attach the Seat Handle Bars (206) to
the Leg Press Main Frame (201) using
two 3/8" x 3" Hex Head Bolts (228), four
3/8" Washers (235) and two 3/8" Nylon
205
Nuts (237).
232
235
218
Attach the Back / Seat Pad (213) to the
213
Leg Press Main Frame (201) using two
3/8" x 2-1/2" Hex Head Bolts (231) and
223
228
two 3/8" Washers (235).
235
206
Cap the Adj Back Arm (205) with two
214
25 x 50 mm Rect End Plugs (218) and
one 50 Sq End Plug (220). Attach the
235
201
206
Back / Seat Pad (213) to the Adj Back
Arm (205) using two 3/8" x 1-1/2" Hex
235
Head Bolts (232) and two 3/8" Washers
237
(235).
214
231
Insert the Adj Back Arm (205) into the
Leg Press Main Frame (201) and lock
with the Quick Release (223).
-8-
Advertisement
Table of Contents
