Appendix B Technical Specifications; Hp Lcd Monitors - HP 1910 User Manual

B Technical Specifications
All specifications represent the typical specifications provided by HP's component manufacturers;
actual performance may vary either higher or lower.

HP LCD Monitors

Face treatment: Glare polarizer with hard coating
Input terminal:
●
VGA connector
●
DVI-D 24–pin D-type connector (select models)
●
HDMI connector (select models)
Table B-1 Model 1910m
Specifications:
Display Type:
Viewable Image Size:
Tilt
Maximum Weight (unpacked):
Dimensions (h x w x d):
Maximum Graphics Resolution:
Optimum Graphics Resolution:
Text Mode:
Dot Pitch:
Horizontal Frequency (analog mode):
Vertical Frequency (analog mode):
Environmental Requirements
Temperature (independent of altitude)
Operating Temperature:
Non-Operating Humidity:
Relative Humidity (non-condensing):
TFT LCD active matrix
47.0 cm (18.5 in.) diagonal
–5° to +25°
4.05 kg (8.9 lb)
355 x 470 x 184 mm (14.0 x 18.0 x 7.2 in.)
1366 x 768 @ 60 Hz analog mode
1366 x 768 @ 60 Hz analog mode
720 x 400
0.30 x 0.30 mm
24 to 83 kHz
50 to 76 Hz
5° to 35° C (41° to 95° F)
–20° to 60° C (–4° to 140° F)
HP LCD Monitors 31